Q8 series Apem LED indicators distributed by Ermec
The Apem Q8 series LED bezel features a coloured epoxy resin lens with a 5mm clear super bright LED. The bezel is protruding, recessed and flush (2.8×0.8). Solder lug, pin or termination has a 200mm long wire.
The Q8 series LED indicators are available in red, green, yellow, blue, white and orange. Bi-color (red/green) and tri-color (red/green/yellow) versions are also available. For the bi-color LEDs, the color is changed by reversing the polarity of the supply voltage. For the tri-color version, the indicator has a red and green LED, when both are connected, a yellow LED is produced.
Electrical specifications
|
Voltage |
Operating Voltage |
Operating Current |
|
02 (No Resistor) |
1.8 à 3.3V DC |
20mA max |
|
6V DC |
5.4 à 6.6V DC |
20mA |
|
12V DC |
10.8 à 13.2V DC |
20mA |
|
24V DC |
21.6 à 26.4V DC |
20mA |
|
28V DC |
25.5 à 30.8V DC |
20mA |
|
110V AC |
99 à 121V AC |
6mA |
|
220V AC |
207 à 235V AC |
3mA |
Environmental specifications
The entire range is IP67 certified. This means that the indicators are dust and waterproof and can withstand the effects of immersion from 15 cm to 1 m (6″ to ’40”). The packaging and storage temperature of the components produced by Apem ranges from -40°C to +85°C..
General Specifications
|
Standard LED intensity |
Flush |
Forward Voltage |
|
HE Red |
8mcd |
2.0V |
|
Green |
6mcd |
2.2V |
|
Yellow |
6mcd |
2.1V |
|
Blue |
50mcd |
3.3V |
|
White |
500mcd |
3.3V |
|
Orange |
110mcd |
2.2V |
|
Bi-color (Red/Green) |
15/10mcd |
2.0V/2.2V |
|
Tri-colore (Red/Green/Yellow) |
15/10/6mcd |
2.0V/2.2V/2.1V |
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
For more information:
Find all our product catalogues: Catalogues
Contact one of our experts by phone : 04 78 90 85 64
Or by e-mail: omega@omegacomposants.fr